[1] |
JORGENSEN AM, YOO JJ, ATALA A. Solid organ bioprinting: strategies to achieve organ function[J]. Chem Rev, 2020, 120(19): 11093-11127. DOI: 10.1021/acs.chemrev.0c00145.
|
[2] |
JIANG W, MEI H, ZHAO S. Applications of 3D bio-printing in tissue engineering and biomedicine[J]. J Biomed Nanotechnol, 2021, 17(6): 989-1006. DOI: 10.1166/jbn.2021.3078.
|
[3] |
PARIHAR A, PANDITA V, KUMAR A, et al. 3D printing: advancement in biogenerative engineering to combat shortage of organs and bioapplicable materials[J]. Regen Eng Transl Med, 2021, DOI: 10.1007/s40883-021-00219-w [Epub ahead of print].
|
[4] |
POWELL SK, CRUZ RLJ, ROSS MT, et al. Past, present, and future of soft-tissue prosthetics: advanced polymers and advanced manufacturing[J]. Adv Mater, 2020, 32(42): e2001122. DOI: 10.1002/adma.202001122.
|
[5] |
ZHANG J, WEHRLE E, RUBERT M, et al. 3D bioprinting of human tissues: biofabrication, bioinks, and bioreactors[J]. Int J Mol Sci, 2021, 22(8): 3971. DOI: 10.3390/ijms22083971.
|
[6] |
ZASZCZYŃSKA A, MOCZULSKA-HELJAK M, GRADYS A, et al. Advances in 3D printing for tissue engineering[J]. Materials (Basel), 2021, 14(12): 3149. DOI: 10.3390/ma14123149.
|
[7] |
KAFLE A, LUIS E, SILWAL R, et al. 3D/4D printing of polymers: fused deposition modelling (FDM), selective laser sintering (SLS), and stereolithography (SLA)[J]. Polymers (Basel), 2021, 13(18): 3101. DOI: 10.3390/polym13183101.
|
[8] |
GRAJEWSKI M, HERMANN M, OLESCHUK RD, et al. Leveraging 3D printing to enhance mass spectrometry: a review[J]. Anal Chim Acta, 2021, 1166: 338332. DOI: 10.1016/j.aca.2021.338332.
|
[9] |
PUTRA NE, MIRZAALI MJ, APACHITEI I, et al. Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution[J]. Acta Biomater, 2020, 109: 1-20. DOI: 10.1016/j.actbio.2020.03.037.
|
[10] |
李金泰, 蓝升, 刘毅. 3D打印干细胞技术用于组织器官重建的现状与思考[J]. 器官移植, 2017, 8(4): 267-270. DOI: 10.3969/j.issn.1674-7445.2017.04.003.LI JT, LAN S, LIU Y. Current status and thinking of 3D printing stem cell technology for tissue and organ reconstruction[J]. Organ Transplant, 2017, 8(4): 267-270. DOI: 10.3969/j.issn.1674-7445.2017.04.003.
|
[11] |
PEDDE RD, MIRANI B, NAVAEI A, et al. Emerging biofabrication strategies for engineering complex tissue constructs[J]. Adv Mater, 2017, 29(19): 1-27. DOI: 10.1002/adma.201606061.
|
[12] |
RAVANBAKHSH H, KARAMZADEH V, BAO G, et al. Emerging technologies in multi-material bioprinting[J]. Adv Mater, 2021, DOI: 10.1002/adma.202104730[Epub ahead of print].
|
[13] |
ZHOU G, JIANG H, YIN Z, et al. In vitro regeneration of patient-specific ear-shaped cartilage and its first clinical application for auricular reconstruction[J]. EBioMedicine, 2018, 28: 287-302. DOI: 10.1016/j.ebiom.2018.01.011.
|
[14] |
NOOR N, SHAPIRA A, EDRI R, et al. 3D printing of personalized thick and perfusable cardiac patches and hearts[J]. Adv Sci (Weinh), 2019, 6(11): 1900344. DOI: 10.1002/advs.201900344.
|
[15] |
JALLERAT Q, FEINBERG AW. Extracellular matrix structure and composition in the early four-chambered embryonic heart[J]. Cells, 2020, 9(2): 285. DOI: 10.3390/cells9020285.
|
[16] |
GRIGORYAN B, PAULSEN SJ, CORBETT DC, et al. Multivascular networks and functional intravascular topologies within biocompatible hydrogels[J]. Science, 2019, 364(6439): 458-464. DOI: 10.1126/science.aav9750.
|
[17] |
RAMASWAMY A, BRODSKY NN, SUMIDA TS, et al. Immune dysregulation and autoreactivity correlate with disease severity in SARS-CoV-2-associated multisystem inflammatory syndrome in children[J]. Immunity, 2021, 54(5): 1083-1095. DOI: 10.1016/j.immuni.2021.04.003.
|
[18] |
ALIMI OA, MEIJBOOM R. Current and future trends of additive manufacturing for chemistry applications: a review[J]. J Mater Sci, 2021: 1-27. DOI: 10.1007/s10853-021-06362-7.
|
[19] |
ZADPOOR AA. Design for additive bio-manufacturing: from patient-specific medical devices to rationally designed meta-biomaterials[J]. Int J Mol Sci, 2017, 18(8): 1607. DOI: 10.3390/ijms18081607.
|
[20] |
ANTMEN E, VRANA NE, HASIRCI V. The role of biomaterials and scaffolds in immune responses in regenerative medicine: macrophage phenotype modulation by biomaterial properties and scaffold architectures[J]. Biomater Sci, 2021, 9(24): 8090-8110. DOI: 10.1039/d1bm00840d.
|
[21] |
AMEKYEH H, TARLOCHAN F, BILLA N. Practicality of 3D printed personalized medicines in therapeutics[J]. Front Pharmacol, 2021, 12: 646836. DOI: 10.3389/fphar.2021.646836.
|
[22] |
GUILLOTIN B, SOUQUET A, CATROS S, et al. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization[J]. Biomaterials, 2010, 31(28): 7250-7256. DOI: 10.1016/j.biomaterials.2010.05.055.
|
[23] |
HULL SM, BRUNEL LG, HEILSHORN SC. 3D bioprinting of cell-laden hydrogels for improved biological functionality[J]. Adv Mater, 2021: e2103691. DOI: 10.1002/adma.202103691.
|
[24] |
CARVALHO V, GONÇALVES I, LAGE T, et al. 3D printing techniques and their applications to organ-on-a-chip platforms: a systematic review[J]. Sensors (Basel), 2021, 21(9): 3304. DOI: 10.3390/s21093304.
|
[25] |
ZOHAR B, BLINDER Y, EPSHTEIN M, et al. Multi-flow channel bioreactor enables real-time monitoring of cellular dynamics in 3D engineered tissue[J]. Commun Biol, 2019, 2: 158. DOI: 10.1038/s42003-019-0400-z.
|
[26] |
YAMAMOTO K, YAMAOKA N, IMAIZUMI Y, et al. Development of a human neuromuscular tissue-on-a-chip model on a 24-well-plate-format compartmentalized microfluidic device[J]. Lab Chip, 2021, 21(10): 1897-1907. DOI: 10.1039/d1lc00048a.
|
[27] |
LIND JU, BUSBEE TA, VALENTINE AD, et al. Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing[J]. Nat Mater, 2017, 16(3): 303-308. DOI: 10.1038/nmat4782.
|
[28] |
CHEN X, LIAN T, ZHANG B, et al. Design and mechanical compatibility of nylon bionic cancellous bone fabricated by selective laser sintering[J]. Materials (Basel), 2021, 14(8): 1965. DOI: 10.3390/ma14081965.
|
[29] |
PAGAC M, HAJNYS J, MA QP, et al. A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing[J]. Polymers (Basel), 2021, 13(4): 598. DOI: 10.3390/polym13040598.
|
[30] |
ZHOU X, REN L, LIU Q, et al. Advances in field-assisted 3D printing of bio-inspired composites: from bioprototyping to manufacturing[J]. Macromol Biosci, 2021: e2100332. DOI: 10.1002/mabi.202100332.
|
[31] |
MAO M, LIANG H, HE J, et al. Coaxial electrohydrodynamic bioprinting of pre-vascularized cell-laden constructs for tissue engineering[J]. Int J Bioprint, 2021, 7(3): 362. DOI: 10.18063/ijb.v7i3.362.
|
[32] |
WU Y, ZHANG Y, YU Y, et al. 3D coaxial bioprinting of vasculature[J]. Methods Mol Biol, 2020, 2140: 171-181. DOI: 10.1007/978-1-0716-0520-2_11.
|
[33] |
LI C, HAN X, MA Z, et al. Engineered customizable microvessels for progressive vascularization in large regenerative implants[J]. Adv Healthc Mater, 2021: e2101836. DOI: 10.1002/adhm.202101836.
|
[34] |
DE MOOR L, SMET J, PLOVYT M, et al. Engineering microvasculature by 3D bioprinting of prevascularized spheroids in photo-crosslinkable gelatin[J]. Biofabrication, 2021, 13(4). DOI: 10.1088/1758-5090/ac24de.
|
[35] |
ZHONG C, XIE HY, ZHOU L, et al. Human hepatocytes loaded in 3D bioprinting generate mini-liver[J]. Hepatobiliary Pancreat Dis Int, 2016, 15(5): 512-518. DOI: 10.1016/s1499-3872(16)60119-4.
|
[36] |
NIKOLAEV M, MITROFANOVA O, BROGUIERE N, et al. Homeostatic mini-intestines through scaffold-guided organoid morphogenesis[J]. Nature, 2020, 585(7826): 574-578. DOI: 10.1038/s41586-020-2724-8.
|
[37] |
马军, 贺强, 李先亮. 器官移植受者免疫状态监测最新进展[J]. 器官移植, 2019, 10(3): 333-335, 338. DOI: 10.3969/j.issn.1674-7445.2019.03.019.MA J, HE Q, LI XL. The latest progress on monitoring the immune status of organ transplant recipients[J]. Organ Transplant, 2019, 10(3): 333-335, 338. DOI: 10.3969/j.issn.1674-7445.2019.03.019.
|
[38] |
肖漓, 解立新, 石炳毅. 肺移植免疫学相关基础与临床研究进展[J]. 器官移植, 2021, 12(6): 637-642. DOI: 10.3969/j.issn.1674-7445.2021.06.001.XIAO L, XIE LX, SHI BY. Progress on basic and clinical research of immunology in lung transplantation[J]. Organ Transplant, 2021, 12(6): 637-642. DOI: 10.3969/j.issn.1674-7445.2021.06.001.
|
[39] |
EDGAR L, PU T, PORTER B, et al. Regenerative medicine, organ bioengineering and transplantation[J]. Br J Surg, 2020, 107(7): 793-800. DOI: 10.1002/bjs.11686.
|
[40] |
KUNG VL, SANDHU R, HAAS M, et al. Chronic active T cell-mediated rejection is variably responsive to immunosuppressive therapy[J]. Kidney Int, 2021, 100(2): 391-400. DOI: 10.1016/j.kint.2021.03.027.
|
[41] |
MA S, FENG X, LIU F, et al. The pro-inflammatory response of macrophages regulated by acid degradation products of poly(lactide-co-glycolide) nanoparticles[J]. Eng Life Sci, 2021, 21(10): 709-720. DOI: 10.1002/elsc.202100040.
|
[42] |
CALDWELL AS, RAO VV, GOLDEN AC, et al. Mesenchymal stem cell-inspired microgel scaffolds to control macrophage polarization[J]. Bioeng Transl Med, 2021, 6(2): e10217. DOI: 10.1002/btm2.10217.
|
[43] |
LIU W, LIANG L, LIU B, et al. The response of macrophages and their osteogenic potential modulated by micro/nano-structured Ti surfaces[J]. Colloids Surf B Biointerfaces, 2021, 205: 111848. DOI: 10.1016/j.colsurfb.2021.111848.
|
[44] |
徐俊明, 周林, 贺强. 树突状细胞在器官移植免疫耐受中的研究进展[J]. 器官移植, 2020, 11(5): 629-634. DOI: 10.3969/j.issn.1674-7445.2020.05.017.XU JM, ZHOU L, HE Q. Research progress on dendritic cell in immune tolerance of organ transplantation[J]. Organ Transplant, 2020, 11(5): 629-634. DOI: 10.3969/j.issn.1674-7445.2020.05.017.
|
[45] |
袁顺, 王志维. 髓源性抑制细胞与移植免疫耐受研究进展[J]. 器官移植, 2020, 11(4): 435-442. DOI: 10.3969/j.issn.1674-7445.2020.04.002.YUAN S, WANG ZW. Research progress on myeloid-derived suppressorcell and transplantation immune tolerance[J]. Organ Transplant, 2020, 11(4): 435-442. DOI: 10.3969/j.issn.1674-7445.2020.04.002.
|